TM 5-3800-205-23-3
WATER TANK WIRING HARNESS REPLACEMENT - CONTINUED
0009 00
REMOVAL - CONTINUED
7.
Disconnect water tank wiring harness (2) from connector (10) at front of water tank.
8.
Cut and discard cable tie (9).
NOTE
While removing water tank wiring harness from conduit from front of water tank, have an assistant feed
lockwire through conduit from rear of water tank.
Lubricating harness with detergent may ease removal.
9.
From front of water tank, remove water tank wiring harness (2) from conduit (8) until lockwire exits conduit.
10.
Disconnect water tank wiring harness (2) from lockwire leaving lockwire inside conduit (8).
8
9
390-2071
2
10
INSTALLATION
NOTE
If installing a new water tank wiring harness, first cut off connector, leaving enough length on wire to splice.
1.
Securely connect water tank wiring harness (2) to lockwire that is inside conduit (8).
2
LOCKWIRE
390-2068
0009 00-4
