TM 5-3800-205-23-3
CHECK VALVE AND LIFT CYLINDER REPLACEMENT - CONTINUED
0026 00
LIFT CYLINDER REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Lift cylinder weighs 128 lb (58 kg).
10.
Attach nylon sling to head end of lift cylinder (17) and to a suitable lifting device. Take up slack in sling.
NOTE
Note alignment and position of pin for installation.
11.
Remove two bolts (25), washers (26), and retainer bar (27) from draft frame (29).
12.
Remove pin (28) from draft frame (29) and head end of lift cylinder (17).
28
26
27
25
29
17
13.
Lower lift cylinder (17) onto suitable cribbing.
NOTE
Note alignment and position of pin for installation.
14.
Remove two bolts (32), washers (33), and retainer bar (34) from lift cylinder support bracket (31).
15.
Remove pin (30) and lift cylinder (17) from machine.
0026 00-8
