TM 5-3800-205-23-3
CHECK VALVE AND LIFT CYLINDER REPLACEMENT - CONTINUED
0026 00
LIFT CYLINDER INSTALLATION - CONTINUED
14.
Remove protective cap, connect hose (1) to check valve (2), and tighten nut (9).
15.
Remove protective cap, connect hose (5) to elbow fitting (3), and tighten nut (4).
16.
Remove protective cap, connect hose (8) to swivel adapter (6) and tighten nut (7).
1
2
9
8
7
6
3
5
4
17.
Fill hydraulic reservoir with oil (Refer to Unit PMCS in TM 5-3800-205-23-1).
18.
Place battery disconnect switch in ON position (TM 5-3800-205-10-2).
19.
Operate lift cylinders (TM 5-3800-205-10-2) and check for leaks and proper operation.
END OF WORK PACKAGE
0026 00-12
