TM 5-3800-205-23-3
HOSE REEL ASSEMBLY MAINTENANCE - CONTINUED
0030 00
HOSE REEL ASSEMBLY AND MOUNTING PLATE REMOVAL
1.
Remove step from hose reel (Refer to Auxiliary Hose Removal).
2.
Disconnect water supply hose (20) from ball valve (21).
20
21
3.
If damaged, remove ball valve (21) and elbow (30) from hose reel assembly (27).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
4.
Secure a nylon sling around hose reel assembly (27) and attach sling to a suitable overhead lifting device. Take up slack
in sling.
5.
Remove seven bolts (28), washers (29), and hose reel assembly (27) and mounting plate (26) from rear of water distrib-
utor.
0030 00-10
