TM 5-3800-205-23-3
HOSE REEL ASSEMBLY MAINTENANCE - CONTINUED
0030 00
HOSE REEL ASSEMBLY AND MOUNTING PLATE REMOVAL - CONTINUED
27
21
26
30
28,29
HOSE REEL ASSEMBLY AND MOUNTING PLATE INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
1.
Secure a nylon sling around hose reel assembly (27) and attach sling to a suitable overhead lifting device. Take up slack
in sling.
1.
Position hose reel assembly (27) and mounting plate (26) on rear of water distributor.
2.
Install seven washers (29) and bolts (28).
NOTE
Apply a thin coat of sealing compound to male threads of fittings.
3.
If removed, install elbow (30) and ball valve (21) to hose reel assembly (27).
4.
Connect water supply hose (20) to ball valve (21). If open, close ball valve by turning handle until perpendicular to
water supply hose.
0030 00-11
