1
Gasket
6
Lockwasher
11
Pin, dowel
2
Spacer
7
Machine screw
12
Machine screw
3
Gasket
8
Pipe plug
13
Machine screw
4
Gear cover assembly
9
Oil seal
14
Button
5
Expansion plug
10
Lockwasher
Figure 37. Timing gear cover group.
(5) Remove the engine oil drain plug and drain the oil into a suitable container.
(6) Remove the capscrews (7, fig. 37) lockwashers (10) securing the cover (4) and gasket (1) to the
crankcase.
(7) Remove the capscrews (13), lockwashers (10), cover (4) and gasket (3) from the spacer (2).
(8) Remove the capscrews (7, fig. 38), lockwashers (6) and camshaft gear (5) from the camshaft (1).
(9) Remove the screw (15) securing the idler gear shaft (11) in the crankcase.
(10) Using a suitable puller, remove the idler gear (10) and shaft (11) from the crankcase and slide the
idler gear from the shaft.
AGO 6871A
81
