TM 5-4610-218-34
CHAPTER 4
REPAIR OF ERDLATOR ASSEMBLY COMPONENTS
Section I. RAW WATER FLOW INDICATOR
WARNING
4-1. Raw Water Flow Indicator.
a. General. The raw water flow indicator is lo-
Dry cleaning solvent, P-D-680,
cated in the raw water-line between the inlet
used to clean parts, is potentially
hose and the top of the erdlator tank. It indi-
dangerous. Avoid repeated and
cates, in gallons per minute, the amount of raw
prolonged breathing of the vapors
water being pumped to the erdlator tank.
and skin contact with the liquid.
b. Removal. Remove the raw water flow indi-
Do not use near open flame or ex-
cator as illustrated in figure 4-1.
cessive heat. Use in a well-venti-
lated area. The flash-point of P-D-
c. Disassembly. Disassemble the raw water
880 is 100-138F (38-59C).
flow indicator as illustrated in figure 4-2.
Figure 4-1. Raw Water Flow Indicator and Piping, Removal and Installation
4-1
