TM 5-4610-218-34
Section II. ERDLATOR AGITATOR SPEED REDUCER
WARNING
a. General. The speed reducer is located on
top of the erdlator tank on the bridge rail assem-
bly above the erdlator agitator. It reduces the
Dry cleaning solvent, P-D-680,
speed from the electric motor to the erdlator agi-
used to clean parts, is potentially
tator.
dangerous. Avoid repeated and
prolonged breathing of the vapors
b. Removal. Removal of the agitator speed re-
and skin contact with the liquid.
ducer is illustrated in figure 4-3.
Do not use near open flame or ex-
c. Disassembly. Disassemble the agitator
cessive heat. Use in a well-venti-
speed reducer as directed in figure 4-4.
lated area. The flash-point of P-D-
680 is 100-138F (38-59C).
NOTE
Retain the entire flexible coupling if a
4-2. Erdlator Agitator Speed Reducer.
replacement speed reducer is to be in-
stalled.
Figure 4-3 Erdlator Agitator Drive Shaft and Speed Reducer Assembly, Removal and Installation
4-3
