TM 55-1930-209-14&P-10
Table 3-2. Exterior Lighting System Troubleshooting (Continued)
Condition
Possible Cause
Suggested Action
8
Anchor light does not come
a.
Bulb burned out
a.
Replace bulb
on when circuit breaker 7P14
on 24 Vdc power panel is
b.
Faulty circuits
b.
Check circuits
closed
c.
Emergency electrical sys
c.
Troubleshoot
tem malfunctioning
(TM 55-1930-209-14
&P-9)
9.
Navigation running lights
a.
Bulb(s) burned out
a.
Replace bulb(s)
(starboardside green light,
portside red light, or white
b.
Faulty circuits
b.
Check circuits
stern light) do not come on
when circuit breaker 2P14 is
c.
Emergency electrical sys-
c.
Troubleshoot
closed
em malfunctioning(
TM 55-1930-209-14
&P-9)
3-14.2.1
Exterior side lights
a
Turn exterior side lights OFF at rotary switches.
b
Redtag appropriate rotary switch with: "WARNING - DO NOT ACTIVATE - REPAIRS BEING MADE."
c
Remove guard over exterior side light. Remove and clean globe with warm soapy water, rinse, and dry.
d
Replace burned-out bulb.
e
Reinstall globe, making sure gasket is seated properly; reinstall guard.
f
Turn light ON to make sure bulb works.
g
Remove red tag.
3-14.2.2
Floodlights
a
Turn floodlights OFF at rotary switches.
b
Redtag appropriate rotary switch with: "WARNING - DO NOT ACTIVATE - REPAIRS BEING MADE".
c
Remove cover. Clean inside reflector and lens with fresh water. Wipe dry and polish.
d
Replace burned-out bulb.
e
Turn light ON to make sure bulb works.
f
Remove red tag.
3-12
