TM 55-193209-14&P-10
Table C-1. Preventive Maintenance Checks and Services for Lighting System (Continued)-
B - Before
D - Daily
Q - Quarterly
D - During
W - Weekly
S - Semiannually
A - After
M - Monthly
A - Annually
Interval
Procedures:
Equipment Is
Item
Item to be
Check for and have repaired
Not Ready/
No.
B D
A
D W M Q S A
Inspected
or adjusted as necessary
Available If:
2)
Redtag appropriate rotary switch
with: 'WARNING - DO NOT ACTI-
VATE. REPAIRS BEING MADE. "
3)
Remove cover. Clean inside reflector
and lens with fresh water. Wipe dry
and polish.
4)
Replace burned-out bulb.
5)
Check to see new light works.
6)
Remove redtag.
•
•
f. Check for burned-out searchlights.
Searchlights
Replace as follows:
inoperable.
1)
Turn searchlights OFF at rotary
switch on searchlight base.
2)
Redtag appropriate rotary switch
with: "WARNING - DO NOT ACTI-
VATE. REPAIRS BEING MADE. "
3)
Open three quick-release latches to
open front door of searchlight.
4)
Remove burned-out bulb.
5)
Clean reflecting mirror and inside of
lens with fresh water. Wipe dry and
polish.
6)
Install new bulb, close door and
secure quick-release latches.
7)
Check to see new light works.
8)
Remove redtag.
•
•
•
g. Check for burned-out shore discharge
Status lights
hose deployment status lights. Replace
inoperable.
as follows:
1)
Open (OFF) circuit breaker 5P14 on
24 Vdc power panel to turn off status
lights.
2)
Redtag appropriate circuit breaker
with: "WARNING - DO NOT ACTI-
VATE. REPAIRS BEING MADE. "
3)
Unplug status light at topdeck and
lower mast.
4)
Loosen cover set screw. Turn cover
by hand counterclockwise and lift off.
Clean with fresh water and wipe dry.
C-5
