TM 55-1930-209-14&P-10
B - Before
D - Daily
Q - Quarterly
D - During
W - Weekly
S - Semiannually
A - After
M - Monthly
A - Annually
Interval
Procedures:
Equipment Is
Item
Item to be
Check for and have repaired
Not Ready/
No.
B D
A
D W M Q S A
Inspected
or adjusted as necessary
Available If:
5)
Replace burned-out bulb.
6)
Reinstall cover, turn counterclock-
wise, and tighten set screw.
7)
Raise mast and plug light cord into
receptacle.
8)
Check to see new light works.
9)
Remove redtag.
•
•
•
h. Check anchor light for burned-out bulbs.
Anchor light
Replace as follows:
inoperable.
1)
Open (OFF) circuit breaker 7P14 on
24 Vdc power panel to turn off anchor
lights.
2)
Redtag appropriate circuit breaker
with: WARNING - DO NOT ACTI-
VATE. REPAIRS BEING MADE. "
3)
Remove anchor light cover. Clean
with fresh water and wipe dry.
4)
Replace burned-out bulb.
5)
Reinstall light cover.
6)
Check to see new light works.
7)
Remove redtag.
•
•
•
i. Check navigation lights for burned-out
Navigation
bulbs. Replace as follows:
lights
inoperable.
1)
Open (OFF) circuit breaker 2P14 on
24 Vdc power panel to turn off naviga-
tion lights.
2)
Redtag appropriate circuit breaker
with: "WARNING - DO NOT ACTI-
VATE. REPAIRS BEING MADE. "
3)
Remove navigation light cover. Clean
with fresh water. Wipe dry.
4)
Replace burned-out bulb.
5)
Reinstall light cover.
6)
Close (ON) circuit breaker 2P14 to
make sure bulb works.
7)
Remove redtag.
C-6
