TM 55-1930-209-14&P-15 5-19.2    Bilge system a. Perform before operation checks in Appendix C. b. Check that equipment operates satisfactorily while performing procedures in paragraphs 5-10.2. c. Perform after operation checks in Appendix C. d. Upon successful completion of operation, release barge to depot for long-term storage. Section V.  Manufacturers' service manuals/Instructions 5-20   General.  Manufacturers' service manuals/instructions listed below provide additional information on the sanitation systems.  A copy of each manual is in Appendix B.  It may be necessary to refer to both these manuals/instructions and the drawings listed in Appendix A while performing the procedures in this volume. Component Document title Manufacturer Incinerating Installation Operation Research Products toilet Maintenance: Model Blankenship WB/TR-111 Dallas, TX 75220 (215) 358-4238 Sludge tank air escape Tank Air Escape Valve Robert H.  Wager Co., Inc. valve 1600T Model 1600 Passaic Ave. Chatham, NJ 07928 (201) 635-9200 Strainer, simplex Hayward Simplex Hayward Industrial series # 72 Strainers, Model 72 Products, Inc. 900 Fairmount Ave. Elizabeth, NJ 07207 Bilge pump Service Manual, Moyno Robbins-Myers 35651 SP Pumps, Series 356 Springfield, OH 45501 & 367, Motorized (800) 845-1310 Section VI.  Manufacturers' warranties/guarantees 5-21   General.  Information on the warranty/guarantee for bilge system components is provided below: Component Manufacturer Duration Coverage Incinerating Research Products 1 year for all Materials and toilet Blankenship components except workmanship WB/TR-111 Dallas, TX 75220 heater for 6 (215) 358-4238 months Sludge tank air Robert H.  Wager Co., 1 year from Materials and escape valve Inc. date of ship- workmanship 1600T Passaic Ave. ment Chatham, NJ 07928 (201) 635-9200. Bilge pump Robbins-Myers 1 year from Materials and 35651 Springfield, OH date of ship- workmanship 45501 ment (800) 845-3039 5-32