TM 55-1930-209-14P-15
6-4
Items required but not furnished. All required items are furnished.
6-5
Tools and test equipment. Use existing tools and equipment onboard. A complete list of tools and test
equipment onboard is in the Tools and Test Equipment List in Appendix D in TM 55- 1930-209-14&P-18.
Section II. Operating Instructions
6-6
Eyewash station. Use eyewash station as given on the procedures attached to the station.
6-7
Removable floor. When reinstalling each mat, make sure numbered label on mat and on structure are opposite
each other.
6-8
Storage areas. Always return items to the designated storage area. Refer to the onboard storage plan when in
doubt as to where item should be stored. Storage area letter designations, locations, and types are listed below:
Storage Area
Location
Type
A
Inboard bulkhead
Shelving
(Workshop)
B
Aft
Shelving and open storage area
(ROWPU space)
in caged area, including rack for
storing ROWPU media filter
hoisting rig
C
Forward bulkhead,
Drum storage racks
(Void 2 port)
aft bulkhead and
aft of chlorination
unit
D
Aft
Storage rack and open space in
(Void 3 starboard)
caged area
E
Forward bulkhead
Drum storage rack
(Void 4 starboard)
F
Shell
Drum storage rack
(Void 4 port)
G
Aft
Storage rack
(Void 5)
H
Starboard
Storage rack for storing two diesel
(Void 1 )
engine mufflers and open storage area
I
Shell
Drum storage rack
(Void 2 starboard)
6-9
Operation under extreme conditions. During freezing temperatures, drain eyewash stations in ROWPU space
and void 2 port.
6-4
