WARNING -----------WARNING ------------WARNING
THIS DRAIN LINE SHOULD NOT BE CONNECTED TO THE CONDENSER OUTLET AS
FLOODING IS LIKELY TO OCCUR. PROVISIONS SHOULD BE MADE FOR EASE OF
PIPING CLEANING BY:
A) USING PLUGGED TEES AT ALL TURNS RATHER THAN ELBOWS:
B) EXTERNALLY INSTALLING, IN AN EASILY ACCESSIBLE LOCATION, THE INLET
WATER STRAINER.
3.2.11 Ductwork (No Discharge Plenum) The ductwork is connected to the fan outlet. Refer to Figure 6 for fan outlet
dimensions. A short piece of canvas should be connected at the fan discharge to minimize the possibility of
compressor and fan noise being transmitted along the duct to the conditioned area. The duct should be sized
for minimum static pressure loss. Consult Table for the required fan speed and horsepower at different external
static pressures for designed air delivery.
24
