6.2.1
of the air conditioner in asliding motion and will come loose from the two (2) plenum clips which have been
factory installed to assure the plenum assembly of proper placement and location of the air conditioning unit.
Once the plenum has been removed from the top of the air conditioner, disassembly of the discharge grill can be
accomplished by the removal of the screws holding the discharge grill in the plenum assembly.
6.2.2
Blower Assembly - Is assembled and disassembled in the following manner:
1)
Remove the upper panel face by the removal of two (2) screws.
2)
With the plenum assembly removed, the fan belt will be removed as defined in paragraph 6.2.2 (a). The
blower assembly compartment area can now be disassembled or reassembled in the following manner:
a)
Remove the fan belt the fan belt can be removed by loosening the four (4) adjustment screws which
hold the fan motor in place and pushing the fan motor to the rear of the air conditioner compartment.
48
