TM 55-1930-209-14&P-21
Table 3-2. Operator/Crew Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
13. Winch Drum Clutch Slips or Drags.
Step 1. Check for proper clutch adjustment.
Adjust clutch (Para 3-12).
Step 2. Other causes.
Notify higher maintenance.
14. Clutches or Brakes Overheat
Step 1. Check for brake slippage.
Adjust brakes (Para 3-11).
Step 2. Check for clutch slippage.
Adjust clutch (Para 3-12).
Step 3. Check system air pressure between 105-125 psi.
Notify higher maintenance.
Step 4. Check for proper clutch air actuator operation.
Notify higher maintenance.
Step 5. Other causes.
Notify higher maintenance.
15. Winch Drum Clutch Releases Slow
Step 1. Check for clutch air actuator failure.
Notify higher maintenance.
Step 2. Other causes.
Notify higher maintenance.
16. Cables Twist During Operation
Step 1. Check for improperly installed cable.
Rewind cable.
Step 2. Other causes.
Notify higher maintenance.
17. Winch Not Pulling Normal Load
Step 1. Check torque converter clutch engagement.
Re-engage clutch.
Step 2. Check torque converter fluid level.
Change fuel filter element.
Step 3. Other causes.
Refer to higher maintenance.
3-10
