TM 55-1930-209-14&P-21
Table 5-1. Direct Support Maintenance Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 3. Check for clogged oil cooler.
Clean or replace oil cooler (paras 5-53 thru 5-56).
9. Starting Motor Will Not Spin
Step 1. Check for defective starter drive.
Repair or replace starter drive (paras 5-28 thru 5-30).
Step 2. Defective starter solenoid.
Repair or replace solenoid (paras 5-28 thru 5-30).
Step 3. Defective starter.
Repair starter (paras 5-28 thru 5-30).
10. Winch Brake Slips
Step 1. Check for defective lining.
Replace brake lining (paras 5-91 thru 5-93).
Step 2. Repair linkage (paras 5-91 thru 5-93) or adjust linkage.
11. Winch Drum Clutch Slips
Step 1. Check for defective clutch actuator.
Replace clutch actuator (paras 5-92 and 5-93).
Step 2. Check for glazed, greasy or worn friction pads.
Replace friction pads (para 5-91).
12. Winch Drum Releases Slowly or Drags
Step 1. Check for low clutch spring tension.
Replace clutch springs as necessary (para 5-84 and 5-85)
Step 2. Check for slipping torque converter clutch.
Adjust the torque converter clutch (paras 5-84 thru 5-85).
Step 3. Check for defective drum bearings.
Replace drum bearings.
5-3
