DECKMASTER
3)
Hydraulic System
a)
Check reservoir for water deposits. Drain water if it exists.
b)
Check hydraulic fluid level. Replenish oil as required (see Appendix 15 for oil specifications.
c)
Run complete system at no load condition for approximately 1/2 hour. Then run system at light load
condition for 1/2 hour. This will circulate the oil throughout the system and remove any foreign particles
via the filters and strainers.
d)
Install new filter elements (see Appendix 1A for Suction Filter and Appendix 1C for Return Filter Element)
e)
Check for leaks and tighten and/or repair as required.
8-18
