DECKMASTER
2.2.2 Apply one coat of Polyamide Epoxy Intermediate coating to a dry film thickness of 4-6 mils DFT.
2.2.3 Apply one coat of Polyurethane Top Coat to a dry film thickness of 1l-2 mils DFT.
2.3
Protective Coating Application - Previously Painted Surfaces
2.3.1 This section deals with items such as pumps, filter housings, motors, etc., that have a "standard shop
enamel" coating applied to them.
2.3.2 Apply one coat of Universal Primer to a dry film thickness of 1-2 mils DFT.
2.3.3 Apply one coat of Polyurethane Top Coat to a dry film thickness of 1h-2 mils DFT.
3.0
Internal Closed Surfaces
3.1
Unless covered by another specification, no internal surfaces shall be abrasive blasted or coated.
4.0
Approved Sources
4.1
The following coating systems are listed for reference only. These materials, or approved equals, may be used
per this specification.
Inorganic
Polyamide
Universal
Supplier
Zinc
Epoxy
Polyurethane
Primer
Matcote
1-289
1-8442 Series
2-500 Series
3-355
Mobil
Chemical
#7
89 Series
40 Series
Alumapoxy
Carboline
#11
190HB Series
134 Series
GP Series
8-21
