Engine
Disassembly and Assembly
Install Fuel Injection Pumps
1251-012
Tools Needed
A
B
C
D
6V4186
Timing Pin
1
8S2244
Extractor
1
8S4613
Wrench
1
9S228
Rack Position Tool Group
1
3S3270
Contact Point 144.45 mm
1
(1.75") long]
C-Clamp
1
1. Install spacer (1) in the fuel injection pump housing.
2. Install tool (A) in the fuel injection pump housing.
Move the rack until tool (A) can be installed to hold the
rack in the center position. The rack must be In the
center position to install the fuel injection pumps.
3. Turn the camshaft until the lobe of the camshaft is
down for the pump to be Installed 4. Install tool (B) on
the bonnet of the fuel injection pump.
4. Install tool (B) on the bonnet of the fuel injection
pump.
5. Install the fuel injection pump in the pump housing
with saw cut (slot) (3) in the gear In alignment with the
small pin (2) and groove (4) in the barrel in alignment
with dowel (5) in the pump housing .
33
