Engine
Disassembly and Assembly
NOTICE
If the original lifters are to be installed in the fuel injection
pump housing, put identification marks on them as to
their location in the housing.
3. Remove lifters (3) from the fuel injection pump
housing.
4. Put the fuel injection pump housing on end on blocks,
and use tool (A) to remove snap ring (4) from the
camshaft.
5. Use a soft hammer to push the camshaft toward the
governor end of the fuel Injection pump housing to
loosen washer (5) on the camshaft. Remove washer (5).
6. Remove camshaft (6) from the fuel injection pump
housing.
7. Remove bearings (7) from the drive end of the fuel
injection pump housing.
37
