Engine
Disassembly and Assembly
Fuel Injection Pump Housing
11. Install rack (12) in the fuel injection pump housing
with the groove in the end of the rack In alignment with
the ear (tab) of the rack bearing at the drive end of the
fuel injection pump housing.
12. Install the gasket and cover (13) on the
fuel Injection pump housing.
END BY:
a. assemble governor
b. Install fuel injection pumps
Fuel Transfer Pump
Remove And Install Fuel Transfer
Pump 1256-010
1. Turn the fuel supply line valve to the "OFF" position.
2. Remove clamp (1) that holds the fuel drain line to the
fuel transfer pump. Remove fuel lines (4) and (5).
3. Remove bolts (2) and fuel transfer pump (3) from the
fuel injection pump housing.
Remove the O-ring seal from the fuel transfer pump if
necessary.
4. Make sure the O-ring seal is in position on the fuel
transfer pump. Put the fuel transfer pump in position on
the fuel injection pump housing. Install bolts (2) that hold
the fuel transfer pump to the fuel injection pump housing.
5. Install the clamp that holds fuel drain line (1) to the
fuel transfer pump. Install fuel line (4) between the fuel
transfer pump and the fuel filter base. Install fuel line (5)
between the fuel transfer pump and the fuel priming
pump.
6. Turn the fuel supply line valve to the "ON" position.
40
