Engine
Disassembly and Assembly
2. Put clean diesel fuel on seal (3). Put seal (3) in
position on cover (4) as shown. Put cover (4) on housing
(1), and install the screws that hold it.
3. Put clean diesel fuel on seal (5). Put seal (5) and
guide and tappet assembly (6) in position in housing (1).
4. Put clean diesel fuel on 0-ring seal (8). Put O-ring
seal (8) in position on sleeve (7), and install sleeve (7) in
housing (1).
5. Install piston (9) in sleeve (7).
6. Put clean diesel fuel on seal (10). Put seal (10), valve
assembly (11) and washer (12) in position in piston (7).
7. Put clean diesel fuel on O-ring seals (13) and (14).
Put the O-ring seals and valve assembly (15) in position
in cover (16) as shown.
8. Put spring (17) and cover (16) in position on housing
(1), and install the bolts that hold them.
END BY:
a. install fuel transfer pump
43
