Engine Disassembly and Assembly
Valve Seat Inserts
3. Lower the temperature (freeze) of the new valve seat
inserts. Use tooling (A) to install the new valve seat
inserts. Do not increase the diameter of the extractor in
the valve seat insert when the insert is installed in the
cylinder head.
END BY:
a. install valves
Water Directors
Remove And Install Water Directors 1115-010
START BY:
a. remove cylinder head assembly and spacer plate
1. Remove old water directors (1) from the cylinder
head.
2. Clean the cylinder head.
3. Install new water directors in the cylinder head with
the notch in the water director in alignment with the "V"
mark on the cylinder head. Install the water director to a
depth of 0. 8 + 0. 6 mm (.03 + .02 in.) below the
surface of the cylinder head.
END BY:
a. install cylinder head assembly and spacer plate
86
