TM 55-2090-201-14&P
3-23.
PIPING, AIR LINES AND FITTINGS, TYPE A AND B SEPARATORS
(Continued).
LOCATION
ITEM
ACTION
R E M A R K S
Electrical shock or serious injury may result if
electric power is not shut off prior to perform-
ing maintenance on the separators.
3. 1st (pre- a. Sensor
Remove screws (1) tee cover
filter)
tee (4) (2) and gasket (3) from 2nd
2nd (No.
stage sensor tee (4).
2) stage
solenoid
b. Sole-
Remove connectors (5) and
coil and
noid
separate coil leads (6).
valve
opera-
bonnet
ted
dis-
charge
valve
coil
(13)
c. Coil
Remove retaining cap (7),
housing
nameplate (8) and coil hous-
(9)
d. Coil
(13)
e. Valve
bonnet
(17)
ing (9).
(1) Unscrew locknut (10)
securing nipple (11)
to baseplate (14).
(2) Remove nipple (11) from
pulling elbow (12).
(3) Pull straight out on
coil (13) and remove
coil (13) and baseplate
(14).
(1) Remove bonnet screws
(15) and lockwashers
(16).
(2) Remove valve bonnet (17)
from valve body with
diaphragm and related
parts attached.
3-132
