TM 55-2090-201-14&P
3-26.
PRESSURE GAUGE AND VESSEL TUBING, TYPE A AND B SEPARATORS.
This task covers:
a.
Removal
b.
Repair/Replace
c.
Installation
INITIAL SETUP
Test Equipment
None
Tools
Tool Kit, General Mechanics
Material/Parts
Tubing
Male connector assembly
Personnel Required
Equipment Condition
1
LOCATION
ITEM
ACTION
R E M A R K S
1.
Vessel
a. Unscrew female connector
If "O" ring (8),
tubing
(1).
seal (9) or
locknut (10) is
defective re-
place male con-
nector assembly
(11).
b. Remove male connector
(2) from vessel (3).
2.
Pressure a. Unscrew female connector
gauge
(4).
tubing
b. Remove male connector (5)
from back of pressure
gauge (6).
c. Remove tubing (7).
Discard defect-
ive tubing.
NOTE
Remove other tubing and connectors in the same manner.
3-150
