CONTROL BOX ASSEMBLY REPAIR.-continued.
High voltages in this equipment can cause serious injury or death.
Be certain that all power is removed before installing box.
Control box assembly is heavy/difficult to handle. Two people are needed to lift it to
prevent injury to personnel or damage to the equipment.
Temporarily install cover (6) and secure with three or four screws (7) for ease of handling.
Position control box assembly (5) in cutout on back of control panel.
Support control box assembly (5) and install four screws (4), flatwashers (3), lockwashers (2), and nuts (1).
Remove screws (7) and open control box (5).
Install cable assemblies W48 (Paragraph 3-25), W49 (Paragraph 3-33) and W52 (Paragraph 3-27)