TM 10-4610-246-13
4.24
MAINTENANCE OF FRAME ASSEMBLY.
This task covers:
a.
Removal
c.
Installation
b.
Installation
INITIAL SETUP
Tools
Equipment Conditions
Tool Kit, General Mechanics
Manifold assembly disconnected (para. 4.18).
(Item 1, App. B)
a.
Removal.
(1) Remove screws (1, Figure 4-17) and
nameplate (2).
(2) Remove screws (3) and instruction
plate (4).
(3) Remove two hex nuts (5), two lock-
washers (6), two flat washers (7).
(4) Remove bracket (8).
b.
Repair.
Repair is accomplished by replacement
of damaged parts.
c.
Installation.
(1) Install instruction plate (4) with screws
(3).
(2) Install nameplate (2) with screws (1).
(3) Install
bracket
(8)
with
two
flat
washers (7), two lockwashers (6), and
two hex nuts (5).
4-26
Figure 4-17. Frame Assembly