TM 10-4610-215-10
TM 08580A-10/1
LEGEND:
1.
Interconnector
2. Product Water Tube
3. R.O. Element
Figure 3-7. Element Replacement
(7) Remove second R.O. element from sealed plastic bag.
(8) Install brine seal (1) into groove of second R.O. element. Make sure that the open end of the
seal is opposite the direction of flow.
(9) Refer now to fig. 3-8. Insert product water tube (2) of the second R.O. element into
interconnector (3).
LEGEND:
Brine Seal
1.
2. Product Water Tube
3. Interconnector
Figure 3-8. Element Replacement
(1O) Refer now to fig. 3-9. Slide both R.O. elements (1) and interconnector (2) into R.O. vessel
(3) until they are centered in the vessel.
(11) Place end connectors (4) on both ends of product water tubes of R.O. elements. Join them to
product water tubes of end caps.
(12) Align end caps with matchmark on R.O. vessel.
(13) Press end caps onto studs.
3-24
