TM 10-4610-215-24
TM 08580A-24/2
(5) Position cartridge assembly (4) into valve body (3) and align mounting holes.
(6) Position cap (2) over cartridge assembly (4) and align mounting holes.
CAUTION
To prevent damage to valve caps, torque screws to a maximum
of 30 inch–lbs.
(7) Install four screws (1) through cap (2), cartridge assembly (4), and valve body (3).
q. Reassembly, Multimedia Filter Control Valve Piping Assembly. (Figure 3-40)
(1) Install pipe assembly (30) onto valve assembly (31).
(2) Install nipple (29) and elbow (28) into valve assembly (31).
(3) Install nipple (27) and flange (26) into elbow (28).
(4) Install three nipples (25A) and elbows (25) into valve assembly (31).
(5) Install pipe (23) into elbow (25).
(6) Install tee (24) onto pipe (23).
(7) Install bushing (22) in tee (24).
(8) Install nipple (21) in bushing (22) and strainer (20) onto nipple (21).
(9) Install nipple (19) in strainer (20) and tee (16) on nipple (19).
(10) Install adapter (17) into tee (16).
(11) Install elbow (18) into tee (16).
(12) Install pipe (14) in elbow (25) and flange (15) onto pipe (14).
(13) Install nipple (8) on control valve assembly (31) and tee (9) on nipple (8).
(14) Install flow control (10) in tee (9)
(15) Install nipple (13) in tee (9).
(16) Install tee (11) onto flow control (10).
(17) Install nipple (12) in tee (11) and half union (1) onto nipple (12).
(18) Install diaphragm valve (5) onto nipple (13).
3-176
