TM 10-4610-215-24
TM 08580A-24/2
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
Repair by welding, cracks, fractures, and holes in tanks.
Replace and weld cracked, broken, fractured, or missing lifting eyes.
Replace all damaged nuts, bolts, screws, washers, and other hardware.
Recut or retap damaged threads on fittings and fitting connections.
Replace all damaged vent lines, drain lines, pressure lines, pipes, and pipe fittings.
Buff small nicks and scratches out of seating surfaces of O-rings and gaskets with fine emery cloth.
Replace plastic control valve caps.
Replace damaged cartridge assembly of control valve assembly.
Replace damaged, unserviceable, and unrepairable turnbuckles.
Repair support brackets by replacing, rewelding, and straightening.
Replace plastic strainers.
Replace excessively worn zinc anodes.
m. Install, Multimedia Filter Internals.
(1) Through bottom hand-hole of multimedia filter (figure 3-44, sheet 2 of 2), install strainer (11) on nipple
(12) .
(2) Install tee (6) on pipe assembly (7), nipple (9) and cap (10) on nipple (9).
(3) Install pipe assembly (7) in coupling (8).
(4) Install hub (4) to nipple (5).
(5) Install nipple (5) in tee (6).
(6) Carefully install eight laterals (3) on hub (4).
(7) Install U-bolt (2) over nipple (9) and two nuts (1) on U-bolt (2).
(8) Through the top hand-hole of multimedia fitter (figure 344, sheet
(10) .
1 of 2), install nipple (9) in coupling
(9) Install elbow (14) on vent pipe assembly (7), nipple (13) in elbow (14), and strainer (12) on nipple (13).
(10) Install union (8) to vent pipe assembly (7).
(11) Screw union (8) to nipple (9).
3-172
