TM 10-4610-229-10
2-4.
ASSEMBLY AND PREPARATION FOR USE (CONT)
8
Making sure that seals stay in sockets, place nine outer elements in outer sockets on upper
spider.
9
Slowly press lower spider down while alining outer filter elements with guide pins.
10
Install three nuts, six flatwashers, and three springs. Tighten nuts until they make contact with
top flatwashers, then tighten about seven more turns.
11
Lightly lubricate O-ring at top of cartridge cage assembly with silicone lubricant (item 5, appendix
D).
2-84
