TM 10-4610-229-10
2-4.
ASSEMBLY AND PREPARATION FOR USE (CONT)
12
Remove two O-rings from interconnector. Lightly coat O-rings with silicone lubricant (item 5,
appendix D). Install O-rings on interconnector.
13
Insert interconnector with O-rings on core tube of element.
14
Slide element about three-quarters of the way into tube. 15 Remove brine seal from next
element. Inspect seal for damage. If damaged, notify your supervisor. Lightly coat seal with
silicone lubricant (item 5, appendix D). Install seal on element.
15
Remove brine seal from next element. Inspect seal for damage. If damaged, notify your
supervisor. Lightly coat seal with silicone lubricant (item 5, appendix D). Install seal on element.
2-89