TM 10-4610-229-24
2-71. CONTROL PANEL ASSEMBLY REPLACEMENT/REPAIR (CONT)
i. POWER ON OFF Switch Replacement
WARNING
To prevent electric shock, make sure that pretreatment assembly power cable is unplugged.
1
Unplug pretreatment assembly power cable.
2
Tag and remove two wires.
3
Remove nut. Pull switch from rear of control panel.
4
Install switch through rear of control panel.
5
Install nut on front of switch.
6
Install two wires and remove tags.
7
Plug in pretreatment assembly power cable.
2-184
