TM 10-4610-229-24
2-94. BREATHER ASSEMBLY REPLACEMENT/REPAIR (CONT)
b. Disassembly
1
Remove two clamps. Remove tube from hose.
2
Remove hose and seal from breather.
c. Assembly
1
Install seal and hose on breather.
2
Install tube in hose. Install two clamps.
d. Installation
1
Install breather assembly. Install breather clamps.
2
Install clip and spacer. Install two flatwashers, bolt, and nut.
3
Install clip, flatwasher, bolt, and nut.
2-95. FUEL INJECTION LINE REPLACEMENT
This task covers:
a. Removal
b.
Installation
INITIAL SETUP:
Use With
Tools
High Pressure Pump Assembly
General Mechanic's Automotive Tool
Kit, item 10, appendix B
2-241
