TM 10-4610-229-24
2-92. OIL FILTER ASSEMBLY REPLACEMENT/REPAIR (CONT)
c. Base Removal
1
Drain oil (subpara a) and remove filter (subpara b).
2
Unscrew line nut. Disconnect turbocharger oil line.
3
Remove four filter base mounting bolts.
4
Remove six cylinder block mounting bolts.
5
Remove four nuts from oil cooler base.
6
Remove oil filter base.
d. Disassembly
1
Remove four bypass valve cover screws.
2
Remove two covers, springs, and bypass valves.
e. Assembly
1
Install two oil filter bypass valves, springs, and covers.
2
Install four bypass valve cover screws.
f. Base Installation
1
Install oil filter base.
2
Insert six cylinder block mounting bolts. Do not tighten.
3
Install four filter base mounting bolts. Do not tighten.
4
Install turbocharger oil line. Tighten line nut.
2-236