TM 10-4610-229-24
2-99. WATER PUMP REPLACEMENT (CONT)
a. Removal
1
Remove two bolts. Remove water inlet pipe and gasket. Discard gasket.
2
Remove two bolts. Remove temperature regulator pipe and gasket. Discard gasket.
3
Loosen clamps. Remove breather tube.
4
Support weight of water pump.
5
Remove two engine safety shutoff cord mounting bolts, flatwashers, and bracket.
6
Remove seven water pump mounting bolts and flatwashers.
7
Remove two nuts and flatwashers. Remove water pump and gaskets. Discard gaskets.
b. Installation
1
Using a clean rag, clean water pump mating surfaces. Install gaskets.
2
Install water pump. Install seven flatwashers and bolts.
3
Install two flatwashers and nuts.
2-248