TM 10-4610-232-12
4-21. SEPARATOR FRAME. This task covers: (MODELWTA-060 ONLY)
a.
Removal
b.
Disassembly
c.
Repair
d.
Reassembly
INITIAL SETUP.
Tools, see Appx B, Sec III, Ref Code (No.):
Equipment Condition:
Tool Kit, General Mechanics Automotive (1)
ROWPU shutdown, separator piping removed
(para. 4-19), separators removed (para. 4-20).
Materials/Parts:
Lockwashers (TM 10-4610-232-24P)
Washers (TM 10-4G10-232-24P)
REPLACE.
Replace the separator frame if it is damaged beyond repair.
DISASSEMBLY.
a.
Remove two screws (1, Figure 4-23), washers (2), nuts (3), washers (4), and strap retainer (5). Strap(6)will now
be free from leg (7). Remove leg (7).
b.
Remove two screws (8), washers (9), nuts (10), lock washers (11) and strap retainer (12). Remove strap (6).
c.
Remove two screws (13), washers (14), nuts (15), lockwashers (16) and washers (17) from each channel (18).
Remove two channels (18) from frame (25).
d.
Remove three screws(19). lockwashers (20), nuts(21). lockwashers(22) and washers (23). Remove channel
(24) from frame (25).
Figure 4-23. Separator Frame
(MODEL WTA-060 ONLY)
4-110 Change 7
