TM 10-4610-232-12
Figure 4-29. Electrical Installation (sheet 3 of 8) Primary Harness, Back Wall, W-33
NOTE
Bracket has “keyhole” shaped slots so that the heads of screws will pass through the
larger portion of the slot when the bracket is turned.
(4) Loosen two screws (6) and turn socket (5) and bracket (7) slightly until they are free of screws (6). Pull socket
and bracket forward to allow access to wiring harness(11).
(5)
(6)
(7)
Tag and disconnect the two wires from harness (11 ) which connect to socket (5).
Remove two screws (4). Socket (5) and bracket (7) are now free.
Loosen two screws (8), turn housing (9) and remove the housing. Remove two screws (8) and gasket (10).
4-127
