TM 10-4610-232-12
4-87.
DISTRIBUTION PUMP AND MOTOR ASSEMBLY. This task covers:
a. Service
b. Removal
c.
Disassembly
d.
Repair
e. Reassembly.
INITIAL SETUP:
Tools, see Appx B, Sec III, Ref Code (No.):
Personnel Required: 2
Tool Kit, General Mechanics Automotive (1)
Equipment Condition:
Crimper, hand Terminal (2)
ROWPU shutdown.
Wrench, Pipe (5)
Pump cables disconnected from van.
Rivnut Repair Kit (15)
Hoses disconnected from pump (para. 4-86).
Materials/Parts:
General Safety Instructions:
Tape, Antiseize (Appx E, Sec II, Item 67)
Tape, Electrical (Appx E, Sec II, Item 68)
WARNING
Twine (Appx E, Sec II, Item 72)
Observe specific Warning in the text.
Varnish (Appx E, Sec II, Item 73)
Suitable Tags
Gaskets (TM 10-4610-232-24P)
Lockwashers (TM 10-4610-:232-24P)
Washers (TM 10-4610-232-24P)
WARNING
Make sure electrical power is disconnected before working on unit. Failure to do so could
result in serious injury from electrical shock or moving parts.
DISASSEMBLY.
a. Disassembly of Piping. (Refer to Figure 4-102, sheet 1 for Model WTA-060 or Figure 4-102, sheet 1.1 for Model
ROWPU-1).
Figure 4-102. Distribution Pump and Motor Assembly (sheet 1 of 5)
(MODEL WTA-060 ONLY)
Change 7 4-304.1/(4-304.2 blank)
