TM 10-4610-232-12
Figure 4-102. Distribution Pump and Motor Assembly (sheet 3 of 5)
(6) Pull cable (51) through nut (48), washer (49), bushing (50) and adapter (47).
(7) Remove two screws (52), washers (53), nuts (54), Iockwashers (55) and washers (56) and remove power box
(57).
(8) Remove two screws (58), washers (59), nuts (60), Iockwashers (61) and washers (62). Remove bracket (63).
d. Disassembly of Pump and Motor (Figure 4-102, sheet 5).
(1) Remove four screws (64), washers (65), nuts (66), Iockwashers (67) and washers (68).
(2) Lift pump and motor assembly (69) from frame (70).
(3) Remove nut (71 ), Iockwasher (72) and eyebolt (73).
R E P A I R .
a. Replace damaged components.
b. Repair leaks using antiseize tape.
c. Replace damaged carrying strap by removing rivets (para. 4-10
REASSEMBLY.
a. Reassembly of Pump and Motor (Figure 4-102, sheet 5).
(1) Install eyebolt (73) with nut (71) and Iockwasher (72).
(2) Position pump and motor assembly (69) on frame (70).
4-307
