TM 10-4610-232-12
Figure 4-102. Distribution Pump and Motor Assembly (sheet 4 of 5)
(3) Install four screws (64), washers (65), nuts (66), Iockwashers (67) and washers (68).
b. Reassembly of Power Box (Figure 4-102, sheet 4).
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
4-308
Install bracket (63) with screws (58), washers (59), nuts (60), Iockwashers (61) and washers (62),
Install power box (57) with screws (52), washers (53), nuts (54), Iockwashers (55) and washers (56).
Slide cable (51) through adapter (47), bushing (50), washer (49) and nut (48).
Tighten nut (48).
Install adapter (47) and cable (51) in body (57) and secure adapter (47) with conduit nut (46).
Connect three wires (45) as tagged.
Install switch (44), data plate (43), lock ring (42) and screw on switch knob (41).
Install gaskets (40) and cover (39) and secure with four screws (38).
