TM 10-4610-232-34
b. Second Stage Components
(1) Refer to Figure 2-80 and remove five socket head screws (1) and extension nut (2).
(2) Remove locknut (3), gasket (4) and stud (5).
(3) Remove heed cover (6) and head (7).
(4) Carefully remove discharge valve (8) and preformed packing (9) from head (7).
(5) Remove inlet valve (10) from underside of head (7) using valve key.
(6) Remove tube (11) and nozzle (12) from cylinder (15).
(7) Remove four nuts (13) and washers (14).
(8) Remove cylinder (15) and stud (16] if damaged.
(9) Remove the top part of floating piston assembly (17) and separate the bottom part from cylinder (15).
(1O) Remove and discard preformed packing (18) and stud (19), if damaged.
Figure 2-80. Disassemble Air Compressor, Second Stage Components
Change 1 2-231
