TM 10-4610-239-10
TM 08580B-10/1
LEGEND:
1.
Eye Nut
2.
Washer
3.
Bracket
4.
Filter Cover
5.
O-ring
6.
Vent
7.
Compression Plate
8.
Tube Guides
9.
Filter Tube
10.
Sump Seat
Figure 3-10. Cartridge Filter Assembly (Model Nos. 0996108001 and 0996109001)
b.
Removal.
(1)
Shut down ROWPU in the normal manner (see para. 2-31).
(2)
Open VENT CARTRIDGE FILTER valve (fig. 2-58).
(3)
Open DRAIN NO. 1 CARTRIDGE FILTER valve fully (para. 2-12).
(4)
Loosen six eyenuts (1) and washers (2) from the cover brackets (3).
(5)
Remove quick disconnect from vent (6) and lift cover (4), remove O-ring (5) and hose on vent (6).
Check O-ring for cracks, breaks and hardening. Replace O-ring if damaged.
(6)
Remove compression plate (7) with tube guides (8).
(7)
Remove the eight filter tubes (9) and discard.
c.
Installation.
(1)
Install eight new filter tubes (9) making sure that the tube seat is in the guides on the sump seat (10).
3-24
