TM 10-4610-239-10
TM 08580B-10/1
(3)
Clean strainer screen.
(4)
Remove dirt or corrosion from cap (4) and strainer housing (8).
LEGEND:
1
T-Handle
2
Bolts
3
Yoke
4
Strainer Cap
5
Gasket
6
Strainer Screen
7
Drain Plug
8
Strainer Housing
Figure 3-12. Backwash Pump Strainer
c.
Installation.
(1)
Install drain plug (7) in bottom of strainer housing (8).
(2)
Install the strainer screen (6).
(3)
Install the gasket (5) and strainer cap (4) on top of the strainer housing.
(4)
Swing yoke (3) and T-handle screw assembly (1) back into position under the bolts (2).
(5)
Recenter the strainer cap (4) making sure the gasket is positioned correctly.
(6)
Tighten both bolts.
(7)
Tighten T-handle (1).
3-26
