TM 10-4610-239-24
TM 08580B-24/3
REMOVAL. (Cont)
NOTE
There are eight hoses in the airbrake system. All are removed the same. One is shown.
c.
Remove hose (8).
LOOP CLAMP
WARNING
Compressed air can blow dust into eyes. Wear eye protection and turn
drain cock T-handle slowly to avoid a sudden rush of air when releasing
reservoir pressure.
a.
Turn drain cock T-handle (1) slowly counterclockwise to release air pressure from reservoir.
NOTE
Ensure that airflow from reservoir has stopped before closing drain cock.
b.
Turn drain cock T-handle (1) clockwise to close drain cock.
NOTE
There are 22 loop clamps in the airbrake system. All are removed the same. One is shown.
c.
Remove nut (9).
d.
Pull tubing (10) away from chassis until loop clamp (11) is off of stud (12).
e.
Spread loop clamp and (1) remove it.
TEE
WARNING
Compressed air can blow dust into eyes. Wear eye protection and turn
drain cock T-handle slowly to avoid a sudden rush of air when releasing
reservoir pressure.
a.
Turn drain cock T-handle (1) slowly counterclockwise to release air pressure from reservoir.
NOTE
Ensure that airflow from reservoir has stopped before closing drain cock.
2-96
