TM 10-4610-239-24
TM 08580B-24/3
REMOVAL. (Cont)
e.
Work grommet (4) out of hole in chassis.
f.
Pull cable (5) out of grommet and through hole in chassis.
g.
Support composite light (6). Remove two cap screws (7), two washers (8), and composite light.
INSTALLATION.
NOTE
There are two composite lights on the flatbed cargo trailer. Both are
installed the same. One is shown.
a.
Position composite light (6) and install two washers (8) and cap screws (7).
b.
Pull cable (5) through hole in chassis and grommet (4).
c.
Work grommet (4) into hole in chassis.
CAUTION
Failure to match wires as marked will cause malfunctions. Be sure to
connect wires as labeled.
d.
Use wire labels (1) to match halves of four connectors (2). Push matching halves together until they lock.
e.
Push four connectors (2) into spring clips (3).
2-116
