TM 10-4610-239-24
TM 08580B-24/3
NOTE
There are four connector clips on the flatbed cargo trailer.
All are
removed and installed the same.
REMOVAL.
a.
Remove nut (1) and screw (2).
b.
Spread loop clamp (3) so cable (4) can be moved.
c.
Pull electrical connector plugs (5) out of spring clips (6).
NOTE
Ground wire is installed only at front connector clip.
d.
Remove two nuts (7), screws (8), ground wire lug (9), and connector clip (10).
INSTALLATION.
NOTE
Ground wire is installed only at front connector clip.
a.
Position connector clip (10) and ground wire lug (9) and install two screws (8) and nuts (7).
b.
Press electrical connector plugs (5) and into spring clips (6).
c.
Position cable (4) in loop clamp (3) and install screw (2) and nut (1).
2-120
