TM 10-4610-239-24
TM 08580B-24/3
DISASSEMBLY. (Cont)
a.
Loosen six captive screws (1) and remove door (2) and preformed packing (3).
NOTE
There are two types of bulbs in composite light. Note bulb type as you
remove bulb from each socket.
b.
Remove four bulbs (4).
CLEANING.
a.
Using soap solution, clean door (2), body (5), and three lenses (6). Dry with clean, soft rags.
b.
Using soap solution, remove dirt from door (2) and body (5).
c.
Touch up paint. Refer to TM 43-0139.
INSPECTION.
a.
Inspect door for cracked, broken, or leaking lenses; cracked or bent door; damaged heads or threads on screws.
Replace as required.
b. Inspect body for cracks or broken lamp sockets or burnt, brittle, or cut wiring (7). Replace body as required.
c. Inspect bulbs for cracks or loose or deformed basis. Replace as required.
d. Inspect preformed packing for nicks, cuts, or brittleness. Replace as required.
e. Inspect lamp sockets for corrosion. Using sandpaper, remove corrosion as required.
ASSEMBLY.
NOTE
There are two composite lights on the flatbed cargo trailer. Both are
assembled the same. One is shown.
a.
Install four bulbs (4) in lamp sockets (8) as noted during disassembly.
b.
Position preformed packing (3) and door (2) and tighten six captive screws (1).
2-118
