TM 10-4610-239-24
TM 08580B-24/3
INSTALLATION
NOTE
Apply antiseize tape to all male pipe threads before installation.
a.
Install two pipe tees (23) and (24) and elbow (22).
b.
Install three nipples (19), (20), and (21) on three valves (13), (14), and (15).
c.
Install three elbows (16, (17), and (18) on three valves (13), (14), and (15).
d.
Install three valves (13), (14), and (15) on three nipples (19), (20), and (21) as tagged.
e.
Working at rear of control panel (1), position three valves (13), (14), and (15) as a unit with valves aligned with
cutouts and screw holes in control panel (1).
f.
Install connector (12).
g.
Install two adapters (10) and (11) and connectors (8) and (9).
h.
Install flexible tubing (7) on adapter (10). Slide hose clamp (6) on flexible tubing and tighten hose clamp.
i.
Working at front of control panel (1), install six screws (4) and new lockwashers (5).
NOTE
The cartridge filter, pulse dampener, and multimedia filter vent valve handles are
installed the same. One is shown.
j.
Install handle (3) as tagged and nut (2).
2-273
